EURASIAN ECONOMIC COMMUNITY
Customs Union Commission
Decision
of August 16, 2011 N 768

On the adoption of technical regulations customs union
"LOW VOLTAGE SAFETY EQUIPMENT"
(Ver. Decision of the Commission of the Customs Union, EurAsEC
from 09.12.2011 N 884 , from 04.12.2012 N 247 )
In accordance with Article 13 of the Agreement on common principles and rules of technical regulation in the Republic of Belarus, the Republic of Kazakhstan and the Russian Federation on 18 November 2010, the Commission of the Customs Union (hereinafter -Commission) agreed to:
Adopt technical regulations of the Customs Union "On the security of low voltage" (TR CU 004/2011)(Attached).
Approve:
2.1. The list of standards as on a voluntary basis, in compliance with the technical regulations of the
Customs Union "On the security of low voltage" (TR TC 004/2011) (attached)
2.2. The list of standards containing rules and methods (tests) and measurements, including the rules of sampling necessary for the application and enforcement of the technical regulations of the Customs Union "On Low Voltage Safety "(TR TC 004/2011) and the implementation of assessment (confirmation) of products (attached).
Set:
3.1. technical regulations of the Customs Union "On the safety of low voltage equipment"
(hereinafter - the Technical Regulations) come into force on 15 February 2013, (Ver. Commission Decision EurAsEC Customs Union of 09.12.2011 N 884 )
3.2. documents for assessment (confirmation) of compliance with mandatory requirements established by legislation states - members of the Customs Union or regulations of the Customs Union, issued or adopted for the products to which the technical regulations of the Technical Regulations (hereinafter - the product), prior to the entry into force of the Technical Regulations are valid until the end of their actions, but no later than March 15, 2015, unless such documents issued or adopted before the date of official the publication of this decision, which is valid until the end of their validity.
(Ver. Decisions of the Commission of the Customs Union, EurAsEC from 09.12.2011 N 884 ) From the date of entry into force of the Technical Regulations issuance or acceptance evaluation
documents (confirmation) of conformity with mandatory requirements previously established by the legislation of - members Customs union or regulations of the Customs Union is excluded
3.3. until March 15, 2015 allowed the production and introduction of products in accordance with regulatory requirements, the previously established laws of the - of the Customs Union or regulations of the Customs Union, in the presence of evaluation documents (confirmation) of conformity specified mandatory requirements issued or adopted before the effective date of the Technical Regulations.
The above products are marked national conformity (a mark of market), in accordance with the laws of states - members of the Customs Union or the Commission Decision of 20 September 2010 N 386  .(Ver. Decisions of the Commission of the Customs Union, EurAsEC from 09.12.2011 N 884 ) marking a single product with a mark of products on the market states - members of the Customs Union is not allowed.
3.3.1. Until November 15, 2013 allowed the production and issuance of the customs territory of the Customs Union of products that are not subject to the entry into force of the Technical Regulations mandatory assessment (confirmation) mandatory requirements established by normative legal acts of the Customs Union, or the law of the state - a member of the Customs Union Undocumented mandatory assessment (confirmation) and unmarked national conformity (a mark of market)
(Ver. Commission Decision EurAsEC Customs Union of 04.12.2012 N 247 )
3.4. treatment products released into circulation during the period of evaluation documents(Confirmation) compliance specified in subparagraph 3.2 of this decision as well as the goods referred to in paragraph 3.3.1 of this Decision shall be allowed during the life of products installed in accordance with the laws of the - of the Customs Union.
(Ver. Decisions of the Commission of the Customs Union, EurAsEC from 04.12.2012 N 247 )
Secretariat of the Commission with the Parties to prepare a draft plan of action necessary for the implementation of technical regulations and, within three months from the date of entry into force of this Decision, to provide representation to the Commission for approval in due course.
Belarusian Party with Parties on the basis of the monitoring results of the application of standards to ensure preparation of proposals for updating the list of standards referred to in paragraph 2 above, and the view at least once a year from the date of entry into force of technical regulations in the Secretariat of the Commission for approval in due course.
Parties:
(Ver. Commission Decision EurAsEC Customs Union of 09.12.2011 N 884 )
6.1. before the effective date of the Technical Regulations define the state control (supervision),
responsible for the implementation of state control (supervision) over compliance with the Technical Regulations, and to inform the Commission thereof;
(Ver. Decisions of the Commission of the Customs Union, EurAsEC from 09.12.2011 N 884 ) 6.2. from the date of entry into force of the Technical Regulations provide for state control
(supervision) over observance of technical regulations, taking into account paragraphs 3.2 - 3.4 of this Decision.
(Ver. Decisions of the Commission of the Customs Union, EurAsEC from 09.12.2011 N 884 ) Members of the Commission of the Customs Union:

From the Republic of From the Republic of From the Russian
Belarus Kazakhstan Federation
(Print) (Print) (Print)
S.RUMAS U.Shukeyev IGOR SHUVALOV
Approved

by the Commission Decision of the Customs Union
on August 16, 2011 N 768
TECHNICAL REGULATIONS CUSTOMS UNION

TR TS 004/2011
LOW SAFETY EQUIPMENT
ON SAFETY OF LOW-VOLTAGE EQUIPMENT
(Ver. Decisions of the Commission of the Customs Union, EurAsEC from 09.12.2011 N 884 )

Foreword
This technical regulation of the Customs Union developed in accordance with the Agreement on common principles and rules of technical regulation in the Republic of Belarus, the Republic of Kazakhstan and the Russian Federation of November 182010.
This technical regulation of the Customs Union is designed to establish a single customs territory of the Customs Union, a mandatory for the application and enforcement of the requirements for low-voltage, ensuring the free movement of low voltage equipment into circulation in the common customs territory of the Customs Union.
If related to low voltage equipment made other technical regulations of the Customs Union Eurasian Economic Community (hereinafter - the EEC), which establish requirements for low-voltage equipment, the low-voltage equipment shall meet the requirements of the technical regulations of the Customs Union, EurAsEC, the action of which it is subject.
Article 1. Sphere of application
This technical regulation of the Customs Union applies to low-voltage equipment, put into circulation in the common customs territory of the Customs Union.
to low voltage, which are subject to these technical regulations Customs union, is an electrical equipment designed for use at a nominal voltage from 50 to 1000 (inclusive) of the AC and from 75 to 1500 (inclusive), DC.
This technical regulation of the Customs Union does not apply to
⋆electrical equipment intended for use in potentially explosive areas ⋆of medical devices,
⋆electrical equipment lifts and hoists (other than electric vehicles), ⋆electric equipment for defense purposes; ⋆controls for pasture fences;
⋆electrical equipment designed for use on air, water, land and underground transport; ⋆electrical equipment designed for safety reactors of nuclear power plants.
This technical regulation of the Customs Union establishes requirements for low voltage in order to protect human life and health, property, and prevent actions that mislead consumers (users) with respect to its use and safety.
Article 2. Definitions
This technical regulation of the Customs Union, the following terms and their definitions:
manufacturer - a legal entity or natural person as individual entrepreneurs on their behalf production and (or) the implementation of low-voltage equipment and responsible for its compliance with safety requirements of technical regulations of the Customs Union,
the importer - the resident of the state - a member of the Customs Union, which is made with a non-resident of - Member Customs union agreement for the transfer of foreign low-voltage equipment, is implementing this equipment and is responsible for its compliance with safety requirements of the technical regulations of the Customs Union;
low-voltage, ensuring the free movement of low voltage equipment into circulation in the common customs territory of the Customs Union.
If related to low voltage equipment made other technical regulations of the Customs Union Eurasian Economic Community (hereinafter - the EEC), which establish requirements for low-voltage equipment, the low-voltage equipment shall meet the requirements of the technical regulations of the Customs Union, EurAsEC, the action of which it is subject.
Article 1. Sphere of application
This technical regulation of the Customs Union applies to low-voltage equipment, put into circulation in the common customs territory of the Customs Union.
to low voltage, which are subject to these technical regulations Customs union, is an electrical equipment designed for use at a nominal voltage from 50 to 1000 (inclusive) of the AC and from 75 to 1500 (inclusive), DC.
This technical regulation of the Customs Union does not apply to
⋆electrical equipment intended for use in potentially explosive areas ⋆of medical devices,
⋆electrical equipment lifts and hoists (other than electric vehicles), ⋆electric equipment for defense purposes; ⋆controls for pasture fences;
⋆electrical equipment designed for use on air, water, land and underground transport; ⋆electrical equipment designed for safety reactors of nuclear power plants.
This technical regulation of the Customs Union establishes requirements for low voltage in order to protect human life and health, property, and prevent actions that mislead consumers (users) with respect to its use and safety.
Article 2. Definitions
This technical regulation of the Customs Union, the following terms and their definitions:
manufacturer - a legal entity or natural person as individual entrepreneurs on their behalf production and (or) the implementation of low-voltage equipment and responsible for its compliance with safety requirements of technical regulations of the Customs Union,
the importer - the resident of the state - a member of the Customs Union, which is made with a non-resident of - Member Customs union agreement for the transfer of foreign low-voltage equipment, is implementing this equipment and is responsible for its compliance with safety requirements of the technical regulations of the Customs Union;
-  necessary level of protection from injury, rotating and stationary parts of the low-voltage equipment,
-  the necessary level of protection from the hazards of non-electrical origin arising from the application low voltage equipment, including those caused by physical, chemical or biological agents,
-  the required level of insulation and protection;
-  required level of mechanical and electrical endurance,
-  the required level of resistance to external factors, including the nature of the non-mechanical, with appropriate climatic conditions of the environment,
-  the absence of unacceptable risk due to overload emergency conditions and failures caused by external and internal factors of influence,
-  no unacceptable risk connecting and (or) installation.
Low-voltage equipment should be designed and manufactured in such a way that it is not the source fire in normal and emergency conditions.
Consumer (user) should be given the necessary level of information for the safe use of low-voltage equipment for the purpose.
Article 5. Labeling requirements and operational documents
Name and (or) the designation of low-voltage equipment (type, make, model), its main features and characteristics that affect the safety and the name and (or) the trademark of the manufacturer, the name of the country where produced low-voltage equipment, should be applied to the low-voltage equipment and specified in the annexed operational documents.
This manufacturer's name and (or) its trademark, name and designation of low-voltage equipment (type, make, model) should also be marked on the packaging.
If the information listed in paragraph 1 of this Article shall not apply to low-voltage equipment, they can only be specified in the attached to the equipment operational documents. In this case, the name manufacturers and (or) its trademark, name and designation of low-voltage equipment (type, make, model (if any)) shall be marked on the packaging.
Low voltage marking must be legible, easy to read and apply to low-voltage equipment in an accessible for inspection without disassembly using the tool location.
Operational documents to low voltage equipment should include:
-  the information listed in paragraph 1 of this Article;
-  information on the designation of low-voltage equipment,
-  features and parameters;
terms and conditions for safe use (use) the rules and conditions for installation, storage, transportation (transportation), marketing and disposal (if necessary - to establish requirements for them),
-  information on the measures to be taken when a fault of the equipment,
-  the name and location manufacturer (the person designated by the manufacturer), importer, information with regard to them;
-  month and year of manufacture of low-voltage equipment and (or) the information on the site of application, and how to determine the year of manufacture.
5. Operational documents executed in Russian and in the state (s) language (s) of the State - a member of the Customs Union with the appropriate requirements of the law (s) of the state (in) - Member (s) of the Customs Union.
Operational documents are executed on paper. These can be applied to a set of operational documents electronically. Operational documents supplied Low voltage than domestic use, can be made only in electronic form.
Article 6. Compliance with safety requirements
Compliance with low voltage this technical regulation of the Customs Union is ensured by its security requirements directly or performance requirements of the standards included in the list of standards as a result of which, on a voluntary basis, compliance with the technical regulations of the Customs Union.
Methods (tests) and measurements of low-voltage equipment is standard, included in the list of standards containing rules and methods (tests) and measurements, including rules of sampling necessary for the implementation and execution of the technical regulations of the Customs Union and the implementation of assessment (confirmation) of product conformity.
Article 7. Demonstration of compliance
Before issuance of the market low-voltage equipment must undergo confirmation of compliance with safety requirements of the technical regulations of the Customs Union.
Conformity Low Voltage schemes implemented in accordance with the Regulations about order of the model evaluation schemes (confirmation) in the technical regulations of the Customs Union, approved by the Commission of the Customs Union (hereinafter - the Commission).
Low Voltage Products included in the list annexed to this technical regulation of the Customs Union, to be confirmed in the form of compliance certification (scheme 1c, 3c, 4c).
Voltage equipment that is not included in the above list, to be confirmed in the form of compliance declaration of conformity (circuit 1d, 2d, 3d, 4d, 6d). Selecting a declaration of compliance of low-voltage equipment not included in the list by the manufacturer (a person authorized by themanufacturer), importer.
According to the decision of the manufacturer (the person designated by the manufacturer), importer confirmation of compliance of low-voltage equipment not included in the list, can be in the form of certification in accordance with paragraph 5 of this Article.
In the case of non-application of the standards referred to in paragraph 1 of Article 6 of this technical regulation of the Customs Union, or in the absence of compliance approved low voltage is in the form certification (scheme 1c, 3c, 4c), in accordance with paragraph 10 of this Article.
Certification of low-voltage equipment, produced in series, are carried out on 1c. LVD certification by the manufacturer (the person authorized by the manufacturer).
Party Certification low voltage equipment are carried out on 3s, a single product - the scheme
4c. Batch of low-voltage equipment (single product) manufactured in the common customs territory of the Customs Union, is the manufacturer, the batch of low-voltage equipment (single product), imported into the common customs territory of the Customs Union, is the importer or the manufacturer (a person authorized by the manufacturer).
Certification of low-voltage equipment is conducted by an accredited certification body (assessment (confirmation)), included in the Unified Register of certification bodies and testing laboratories (centers) of the Customs Union.
Tests for certification shall accredited testing laboratory (center), included in the Unified Register of certification bodies and testing laboratories (centers) of the Customs Union.
With the certification of low voltage equipment (circuit 1c, 3c, 4c):
5.1. manufacturer (the person authorized by the manufacturer), the importer provides the certification body (assessment (confirmation)) set of documents for low-voltage equipment, confirming that the low voltage safety requirements of the technical regulations of the Customs Union, which includes:
-  specifications (if any)
-  operational documents;
The list of standards which must meet the requirements of this low-voltage equipment from the List of standards referred to in paragraph 1 of Article 6 of this technical regulation of the Customs Union,
the contract (supply contract) or shipping documentation (for the party of low-voltage equipment (single product) (scheme 3c, 4c) ,
5.2. manufacturer shall take all necessary measures to ensure the production process was stable and provided compliance manufactured low voltage requirements of this technical regulation of the Customs Union;
5.3. Certification Body (assessment (confirmation))
5.3.1. carries out selection of specimen (s)
5.3.2. performs the identification of low-voltage equipment by establishing the identity of its performance characteristics specified in Article 1 of the technical regulations of the Customs Union, the provisions of article 5 of the technical regulations of the Customs Union, and the documents listed in sub-clause 5.1, paragraph 5 of this Article;
5.3.3. organizes test specimen (s) of low-voltage equipment for compliance with standards of the List of standards referred to in paragraph 1 of Article 6 of this technical regulation of the Customs Union, and analyzes the report (s) of testing;
5..4. analyzes the state of production (Figure 1c).
If the manufacturer-certified Quality Management System, or the development and Production of low voltage equipment evaluates the possibility of the system to provide a stable release a certified low voltage corresponding to the requirements of the technical regulations of the Customs Union;
5.3.5. issue a certificate of conformity to a single form, approved by the Commission. The certificate of compliance for low-voltage equipment, a mass-produced - not more than 5 years, for a party of low-voltage equipment (single product) term of the certificate of conformity is not installed;
5.4. manufacturer (the person authorized by the manufacturer), the importer:
5.4.1. does a single sign of products on the market states - members of the Customs Union;
5.4.2. forms after the confirmation of compliance set of documents for low-voltage equipment, which includes
the documents specified in sub-clause 5.1, paragraph 5 of this Article;
-  report (s) of testing;
-  analysis of production conditions,
-  the certificate of conformity;
5.5. Certification Body (assessment (confirmation)) conducts inspection control of low-voltage equipment certified by testing samples in an accredited testing laboratory (center) and (or) the analysis of the production (Figure 1c).
Declaration of Conformity Low Voltage (circuit 1d, 2d, 3d, 4d, 6d) is based on:
- testing of low-voltage equipment (low voltage equipment for the party (a single product) (Figure 2d)
-  Low voltage testing and production control by the manufacturer (for low voltage equipment, manufactured as standard) (Figure 1d);
6.2. evidence obtained with an accredited testing laboratory (center), the certification body quality management systems, included in the Unified Register of certification bodies and testing laboratories (centers) of the Customs Union (3d circuit, 4d, 6d):
-  Low voltage testing, certification, quality management system of production or development and production of low-voltage equipment and production control by the manufacturer ( Low-voltage equipment, a mass-produced) (Figure 6d);
-  Testing of low-voltage equipment (low voltage equipment for the party (a single product) (Figure 4d);
-  Testing of low voltage equipment and production control by the manufacturer (for low voltage equipment, manufactured as standard) (Figure 3d)
Paragraph 5 - Deleted.
(Ver. Decisions of the Commission of the Customs Union, EurAsEC from 09.12.2011 N 884 )
6.3. declaration of compliance of low-voltage equipment, produced commercially by manufacturers (the person authorized by the manufacturer) schemes 1d, 3d, 6d.
Declaration of Conformity Low Voltage Party (single product) carries the manufacturer (the person authorized by the manufacturer), the importer of the schemes 2d, 4d.
7. When declaring the conformity low voltage schemes 1e, 2e:
7.1. manufacturer (the person authorized by the manufacturer), the importer:
7.1.1. generates a set of documents proving the compliance of low voltage requirements of this technical regulation of the Customs Union, which includes:
-  specifications (if any)
-  operational documents;
The list of standards corresponding to the requirements of this low-voltage equipment, from the List of standards referred to in paragraph 1 of Article 6 of this technical regulation of the Customs Union;
-  report (s) of tests carried out in the testing laboratory (center) at the option of the manufacturer (the person designated by the manufacturer), the importer;
-  certificate of compliance (if any)
-  according to the manufacturer's declaration (if any) for a party of low-voltage equipment (a single product)(Figure 2d);
-  contract (supply contract) or shipping documentation for the party of low-voltage equipment (single product) (Figure 2d),
7.1.2. performs the identification of low-voltage equipment by establishing the identity of its performance characteristics specified in Article 1 of the technical regulations of the Customs Union, the provisions established by Article 5 of the technical regulations of the Customs Union, and the documents listed in subparagraph 7.1.1 of paragraph 7.1 of this Article;
7.2. Manufacturer of:
exercise operational control and shall take all necessary measures to ensure that the manufacturing process ensures conformity of low voltage requirements of this technical regulation of the Customs Union (Figure 1e).
Requirements for production processes and controls, and the results of their monitoring should be documented (in the form set manufacturer)
7.3. manufacturer (the person authorized by the manufacturer), the importer:7.3.1. receives a written declaration of conformity for low voltage present technical regulations of the Customs Union on a single form, approved by the Commission, and does a single sign of products on the market states - members of the Customs Union;
7.3.2. includes after conformity to a set of documents on low-voltage equipment as set out in paragraph 7.1.1 of paragraph 7.1 of this Article, a declaration of conformity.
8. When declaring the conformity of low voltage schemes 3d, 4d, 6d:
8.1. manufacturer (the person authorized by the manufacturer), the importer:
8.1.1. generates a set of documents on low-voltage equipment, which includes:
specifications (if any)
operational documents;
list of standards which must meet the requirements of this low-voltage equipment from the List of standards referred to in paragraph 1 of Article 6 of this technical regulation of the Customs Union,
the contract (supply contract) or shipping documentation (for the party low-voltage equipment (single product) (schemes 3d, 4d);
compliance certificate (a copy of the certificate) for quality management system development and production or production of low voltage (Figure 6d)
8.1.2. performs the identification of low-voltage equipment by establishing the identity of its performance characteristics specified in Article 1 of the technical regulations of the Customs Union, the provisions of article 5 of the technical regulations of the Customs Union, and the documents listed in subparagraph 8.1.1 of paragraph 8.1 of this Article;
8.1.3. organizes test specimen (s) of low-voltage equipment for compliance standards from the List of standards referred to in paragraph 1 of Article 6 of this technical regulation of the Customs Union;
8.2. Manufacturer:
provides operational control and shall take all necessary measures to ensure that the manufacturing process ensures conformity of low voltage requirements of this technical regulation of the Customs Union (3d circuit, 6d). Requirements for production processes and controls, as well as the results of their control must be documented (in the form prescribed by the manufacturer);
take all necessary measures to ensure that the process of production and stable operation of the quality management system of production or development and production of low voltage levels harmonize low voltage requirements of this technical regulation of the Customs Union (Figure 6d),
8.3. manufacturer (the person authorized by the manufacturer), the importer:
8.3.1. receives a written declaration of conformity for low voltage present technical regulations of the Customs Union on a single form, approved by the Commission, and does a single sign of products on the market states - members of the Customs Union;
8.3.2. forms after the conformity assessment procedures set of documents for low-voltage equipment, which includes -  the documents specified in subparagraph 8.1.1 of paragraph 8.1 of this article,
-  report (s) of testing;
-  declaration of conformity.
The declaration of conformity shall be registered in accordance with the legislation of the Customs Union. The action begins with the declaration of the day of registration.
The term of the declaration of conformity for low voltage equipment, a mass-produced - no more than 5 years, for a party of low-voltage equipment (single product) term of the declaration of conformity is not installed.
With the certification of low voltage equipment, in case of non-application of the standards of the List of standards referred to in paragraph 1 of Article 6 of this technical regulation of the Customs Union, or in their absence (scheme 1c, 3c, 4c)
- technical specifications (if any), - operational documents,
a description of the technical decisions and risk assessment, confirm the safety of this technical regulation of the Customs Union;
- contract (supply contract) or shipping documentation (for the party of low-voltage equipment (single product) (scheme 3c, 4c);
This certification authority (assessment (confirmation)
- determines, based on the security requirements of the technical regulations of the Customs Union of the specific safety requirements for the certified low-voltage equipment;
- analyzes adopted technical solutions and risk assessment, confirm the safety of this technical
regulation of the Customs Union of the manufacturer,
-  determines from the List of standards referred to in paragraph 2 of Article 6 of this technical regulation of the Customs Union, the standards established by the method of measurement and testing, or in their absence , defines the control procedures, measurements and tests to verify compliance with the specific requirements of the Low Voltage Equipment Safety;
-  arrange for testing of low-voltage equipment and analyzes the report (s) of testing;
10.3.4. analyzes the state of production (Figure 1c).
If the manufacturer of the certified management system of production and development and production of low-voltage equipment evaluates the possibility of the system to ensure stable production of certified low-voltage equipment that meets the requirements of the technical regulations of the Customs Union;
10.3.5. issue a certificate of conformity to a single form, approved by the Commission.
The certificate of compliance for low-voltage equipment, a mass-produced - not more than 5 years, for a party of low-voltage equipment (single product) term of the certificate of conformity is not installed,
10.4.   manufacturer (the person authorized by the manufacturer), the importer:
10.4.1. does a single sign of products on the market states - members of the Customs Union;
10.4.2. forms after the confirmation of compliance set of documents for low-voltage equipment, which includes
-  the documents specified in paragraph 10.1 of this paragraph;
-  report (s) of testing;
-  the results of the analysis of the production
-  certificate of conformity;
10.5. Certification Body (assessment (confirmation)) conducts inspection control of low-voltage equipment certified by testing samples in an accredited testing laboratory (center) and (or) the analysis of the production (Figure 1c).
set of documents for low-voltage equipment should be stored in the states - members of the Customs Union:
LVD - the manufacturer (the person designated by the manufacturer) for at least 10 years from the date of withdrawal (termination) from the production of low-voltage equipment,
low voltage party - the importer or the person designated by the manufacturer for at least 10 years from the last date of sale of the product Party.Article 8. Single sign marking of products on the market states - members of the Customs Union
Low-voltage equipment, meeting the safety requirements of the technical regulations Customs Union and the elapsed confirmation of compliance in accordance with Article 7 of the technical regulations of the Customs Union shall be marked with a mark of one product on the market states - members of the Customs Union.
Single sign marking of products on the market states - members of the Customs Union is to launch low-voltage equipment in circulation in the market.
Single sign of products on the market states - members of the Customs Union is applied to each unit Low voltage in any way, providing crisp and clear image for the life of low-voltage equipment, as well as provided in the annexed operational documents.
May be applied as a single sign of products on the market states - members of the Customs Union only on the packaging and in the annexed operational documents, if it cannot be applied directly to the low voltage.
Low Voltage Products marked with a single sign of products on the market states - members Customs Union with its compliance with all the technical regulations of the Customs Union, EurAsEC, the action of which it is subject and providing for the application of the mark.
Artice 9. Protection clause
State - members of the Customs Union shall take all measures to limit, ban to issue the low voltage in the common customs territory of the Customs Union, and withdrawal from the market low-voltage equipment that does not meet the safety requirements of the technical regulations of the Custom Union.
Application

of technical regulations
Customs Union "On the security of
low voltage "
(TR TC 004/2011)

LIST OF LOW equipment, subject to conformity approval in the form of certification in accordance with technical regulations customs union "LOW SAFETY EQUIPMENT" (TR TC 004/2011)

Electrical apparatus and appliances stores:
-  for cooking and storing food and kitchen works mechanization,
-  processing (washing, ironing, drying, cleaning) lingerie, clothing and footwear;
-  cleaning and cleaning;
-  to maintain and adjust the indoor environment,
-  hygiene,
-  hair care, nail and skin,
-  to warm the body;
-  vibration massager,
-  gaming, sports and fitness equipment,
-  audio and video receivers broadcasting,
-  sewing and knitting;
-  blocks batteries, chargers, voltage regulators,
-  for gardening services,
-  for aquariums and garden ponds,
-  pumps,
-  lighting equipment and lighting,
-  wiring products,
-  extension cords.
Personal electronic computers (PCs).
Low-voltage equipment connected to personal computers.
Electrified instrument (machine manual and portable electric).
Eelectro-musical.
Cables, wires and cords.
Circuit breakers, residual current devices.
Apparatus for the distribution of electrical energy.
Electrical apparatus for controlling electrical installations.

The list of standards as a result of which on a voluntary basis, compliance with technical regulations customs union "LOW SAFETY EQUIPMENT" (TR TC 004/2011)

change N 6 from

01/01/1990

change N 7 from

01/03/1993