俄罗斯测试认证集团/海关联盟EAC认证中心

Центр сертификации EAC Таможенного союза ​ООО ТЕСТ СЕРТ 

上海经合工业设备检测有限公司    俄语区域产品认证专家

021-36411223      eac@cu-tr.org   WeChat:18621862553
KPB认证-哈萨克斯坦工业安全结论(KPB)-KPB Permit,Industrial Safety Expertise
    发布时间: 2019-06-17 17:10    

KPB认证,哈萨克斯坦工业安全结论(KPB),KPB Permit,Industrial Safety Expertise

KPB认证-哈萨克斯坦工业安全结论(KPB)-KPB Permit,Industrial Safety Expertise

哈萨克斯坦工业安全结论(KPB)


KPB Permit,Industrial Safety Expertise


根据2008年2月12日哈萨克斯坦共和国紧急情况部颁布的第24号法令批准的指令,工业安全结论监管作用归属于紧急情况部的工业安全委员会,哈萨克斯坦共和国(KPB)。
 
对于在哈萨克斯坦工业安全场所使用的设备/设施应该遵守2002年4月3日在哈萨克斯坦共和国颁布的第314号法律的管制。本法第4条引用“安全和工业安全专业宣告”作为证明工业安全保证的法律文件。
 
在危险工业安全场所使用、建设、改造、保护和清理项目中需要“安全宣告”。工业安全结论/专业知识KPB许可,优先于声明并获得设备或工艺流程。
KPB许可适用范围及相关产品
根据每种设备的相关技术规则,以下设备需要KPB许可证:
1、压力设备
2、压缩/制冷系统

3、通风系统
4、天然气运输,填充,分配,控制以及相关结构的设备

5、起重设备
6、在轨道上运输

7、一些产品和光发生器
8、哈萨克斯坦第314号法律附录第1号所列的危险货物

对于以下设计,制造,使用,加工,采购,储存,运输和销毁场所,必须获得安全声明:

哈萨克斯坦第314号法律附录第1号所列的危险货物:
1、金属和合金

2、采矿和钻井活动,包括爆炸
3、电磁和放射性辐射源

4、液压设施
5、武器和弹药。



对于销售和将产品投放哈萨克斯坦市场/设备,制造商或其授权代理商应提供:
1、符合哈萨克国家工业安全结论要求
2、应用评估操作安全的程序
3、获得令人满意的行业专业知识结论和KPB许可,并确保其附在产品上

4、实际上,在将设备投放到哈萨克斯坦境内的市场时,需要KPB许可证,该文件的最长期限为6-8个月。

如何获得哈萨克斯坦工业安全结论(KPB)和适用的程序 
工业安全专业知识/结论是获取设备和工艺的KPB许可证或现场安全声明的文件的基本要素。

 
由授权机构实施的工业安全专业知识合格结论,附有信息文件夹/设计文件,应提交哈萨克斯坦共和国紧急情况部的工业安全委员会(KPB)批准并签发KPB许可证或登记安全声明。  

为准备获得KPB许可证或安全声明的文件,制造商或其代理人应提供以下文件:

此申请必须附有以下内容:

1、关于设备制造商和供应商的信息;

2、产品手册,技术护照,描述等信息文件夹;

3、检测设备的程序和方法;
4、测试协议/报告;
5、纠正措施(如有必要);
6、操作安全的条件和要求;
7、设备维修保养程序,故障排除和诊断方法。
这些的组成部分应允许专家检查设备是否按照所有操作安全措施进行设计:这些是设计计划,图纸,材料证书,部件验收测试等。根据设备类型,其他文件可能会被要求。


我们的方案:


获得KPB许可证
登记安全声明
实施行业专业知识/结论
组织和实施工业现场审核
为所有类型/型号的设备(压力设备,压缩机,泵,阀门,管道,电气设备等)准备技术护照
起草预先填写产品技术护照;
计算书检查
监督焊接程序
协助验收测试
遵守计划和测试方法
编写运行安全条件和要求
联系:021-36411223   eac@cu-tr.org   手机/微信:18621862553

      

俄罗斯EAC认证中心

上海经合工业设备检测有限公司

电话:021-36411293       

地址:中国上海浦东新区高科东路777号1号楼2017  

邮箱: eac@cu-tr.org   gost-r@163.com   

skype: gostchina   

手机和微信WeChat:18621862553

www.cu-tr.com   www.cu-tr.org  www.gost.org.cn  

 

                                               微信扫一扫                                          公众号关注




KPB Permit,Industrial Safety Expertise


ebruary 12, 2008, the role of monitoring as regards industrial safety is attributed to the Industrial Safety Committee in the Ministry of Emergency Situations of the Republic of Kazakhstan (KPB).

Safety of the industrial sites activity in Kazakhstan is regulated by Law N 314 issued on April 03, 2002 in the Republic of Kazakhstan. Article 4 of this Law quotes the Declaration of Safety and Industrial Safety Expertise as documents attesting the assurance of industrial safety.

The Declaration of Security is required within the project of construction, renovation, conservation and liquidation of a hazardous industrial site. Expertise of Industrial Safety is prior to Declaration and obtaining KPB Permits for equipment or technological processes.



Scope and relevant products

According to the relevant Technical Rules for each type of equipment, KPB Permit is required for the following equipment:

  • pressure equipment

  • compression / refrigeration system

  • ventilation systems

  • equipment for gas transport, filling, distribution, control, as well as related constructions

  • lifting equipment

  • carriage on rails

  • some products and light generators

Obtaining the Declarationof Security is mandatory for sites of design, manufacture, use, processing, procurement, storage, transportation and destruction of:

  • dangerous goods listed in appendix no.1 of the law no.314

  • metals and alloys

  • mining and drilling activities including that by explosion

  • sources of ionizing andradioactive radiation

  • hydraulic facilities

  • weapons and a mmunition.

Market Launch:

For marketing and placing the products on the market / equipment the manufacturer or its authorized agent shall:

  • meet requirements of the kazakh national industrial security

  • apply the procedures for assessing operating safety

  • obtain the satisfactory industry expertise conclusion and KPB permit and ensure that it is enclosed to the products

In practice KPB Permit is required at the moment of placing the equipment on the market in Kazakh territory, keeping in mind that the maximum term for obtaining this document is 6 months.

How to get it and applicable procedures

The Industrial Safety Expertise is an essential element of the file for obtaining the KPB Permits for equipment and processes or the Declaration of Safety for the site.

 

Satisfactory conclusions of the Industrial Safety Expertise implemented by an authorized body, accompanied by the information folder/design file shall be submitted to the Industrial Safety Committee (KPB) in the Ministry of Emergency Situations of the Republic of Kazakhstan for approval and issuing KPB permit or registration of the declaration of safety.

 

To prepare the file for obtaining the KPB Permit or the Declaration of Safety, the manufacturer or its agent shall provide the following documents:

  • administrative information about the manufacturer and supplier of the equipment

  • information folder

  • program and equipment testing methods

  • testing protocols

  • act of corrective actions (if necessary)

  • operational safety conditions and requirements

  • technical maintenance procedures, troubleshooting and diagnostic

The components of the file should allow the experts to check if the equipment has been designed in accordance with all measures of operating safety. These are plans, drawings, material certificates, acceptance testing of components etc. Depending on the type of equipment, other documents may be requested. 

Our solutions:

  • obtaining KPB permit

  • registration of the declaration of safety

  • implementation of industry expertise

  • organizing and implementing the industrial site audits

  • preparation of technical passports for all types of equipment (pressure equipment, compressors, pumps, valves, piping, electrical equipment, etc.)

  • drafting of pre-filled models of passports;

  • calculation check

  • supervision of welding procedures

  • assistance in acceptance testing

  • compliance of program and testing methods

  • development of operational safety conditions and requirements

  • formatting of the information folder

联系:021-36411223   eac@cu-tr.org   手机/微信:18621862553