您当前位置:首页 > 认证服务 > 俄罗斯认证服务

EAC-EX防爆认证

  

The Ex-Proof Equipment Certification (Explosion Protection Certificate)

防爆产品海关联盟CU-TR认证
  


法规:ТР ТС 012/2011 О безопасности оборудования для работы во взрывоопасных средах关于爆炸环境中使用的设备安全性(防爆产品)

防爆电机,防火电机,隔爆电机、增安电机是否都能用以上字母表示?如何可以用以上字母表示,该如何用行业字母术语表示? EExp:正压型;

EEx d:隔爆型

EEx de:隔爆增安型;

 EEx e:增安型;

EEx nA:无火花防爆型;

CEI:IEC:国际电工委员会 

防爆电机:电机的统称,指各种防爆标准的电机,包括各种防爆类型;

 防火电机:flameproof motor,电机的统称,没有具体的一种标准,我们一般认为防火电机也可以叫防爆电机; 

隔爆电机:EEx d 增安电机;

EEx e 隔爆电机(EEx d)和增安电机

(EEx e)是最常用的2种类型防爆电机,EEx d的应用环境区域比EEx e更高。 

温度等级 T3、T4、T5、T6意义。

 电气设备按其最高表面温度分为T1~T6组,使得对应的T1~T6组的电气设备的最高表面温度 不能超过对应的温度组别的允许值。温度组别、设备表面温度和可燃性气体或蒸气的引燃温 度之间的关系如下所示。 电气设备最高表面温度 450 300 200 135 100 85 温度组别 T1 T2 T3 T4 T5 T6 9. 

Group I、IIB、IIC;其中I和IIB,IIC代表的意义。

Ⅰ类设备:用于矿井地下部分的设备和用于这些矿井地面设施部分的设备,能因沼气和/或易燃粉尘而发生危险。 

II类设备:工厂用电设备,用于能因爆炸环境而发生危险的其他场合的设备。

Ⅱ类设备进一步细分为:ⅡA类(丙烷);ⅡB类(乙烯);ⅡC类(氢气);Ⅱ类(所有气体),其中A表示气体环境为丙烷,B表示气体环境为乙烯,C类表示气体环境为氢气。 IIB和IIC是电气设备和气体的防爆级别 IIB代表最小点燃能量为60微焦 IIC代表最小点燃能量为20微焦 

 

10. 2G、2D、2GD代表的意义。 2G表示表面气体高防护类别,2D表示表面粉尘高防护类别,2GD表示表面气体和粉尘高防护类别。其中G、D表示爆炸环境的类型:G(气体、蒸气或薄雾)和D(粉尘)

我们在俄罗斯有15年的防爆测试和认证资质专业从事防爆产品的测试和认证,对于各种防爆产品建立了完善的资料库和技术中心,对500多家防爆研究所和研发中心进行了紧密的合作,对于各国的防爆标准和防爆认证程序非常的了解。经过多方的研究和讨论现在我们俄罗斯防爆产品检验测试中心,对于中国的产品可以接受,没有工厂样品测试和没有工厂审核的情况下签发防爆证书。

付款方式:合同签订后支付50%预付款在收到证书电子版扫描件后支付50%余款;

海关联盟EAC防爆认证,-CU-TR 012/2011防爆认证。
付款方式:合同签订后支付50%预付款在收到证书电子版扫描件后支付50%余款;

认证时间:1个月;

测试:我可以没有样品测试

审核:我可以没有工厂审核

 只要有中国防爆即可。
具体费用联系我们即可。

021-36411223   021-36411293
skype:gostchina
e-mail:eac@cu-tr.org  
 


EAC防爆认证,海关联盟防爆认证,EAC防爆认证,CU-TR防爆认证,CU-TR 012/2011防爆认证。TR CU防爆认证,EAC-EX防爆认证,CU-TR防爆证书,海关联盟EX认证

About documentation, we will need: 要求资料
- user's manuals in Russian 
俄文说明书
- drawings in Russian 
俄文图纸

-中国防爆证书-俄文翻译

如下资料有请提供:

1、 所有的认证测试报告 (中国CNEX或IEX EX 或CE-ATEX证书 94/9/EC

-  所有的认证 (如果有的话整机提供中国CNEX或IEX EX 或CE-ATEX证书 94/9/EC等)

-配件认证证书 (如果有的话一定提供中国CNEX或IEX EX 或CE-ATEX证书 94/9/EC等)

2、 ISO9001证书—必须

3、 说明书/手册—俄文必须

4、 设备技术护照

5、 图纸,(安装方案, 图纸套,使用材料)。--俄文

6、 电气图纸—俄文

7、 包含技术解决方案和风险评估的描述注释

8、 填写申请表格

9、海关联盟代表公司信息-进口商资料:(1)企业法人营业执照(Огрн),公司详细信息(名称、法定地址、法人代表、电话,传真、邮件)提供代表服务加5000元

The certificate of conformity for EX-proof equipment (this document is sometimes called as the Explosion Protection Certificate) is a document, which proves that duly identified Ex-proof equipment conforms to the specific standard for the type of explosion protection.

All ex-proof equipment including ex-proof parts of other equipment and sets are listed in the "Nomenclature of products (works) and services, which should be certified in a mandatory manner under legislative acts of the Russian Federation". The ex-proof equipment certification is carried out to all goods used in ex-areas.

SHANGHAI SEC is a certification body that is able to obtain this certificate in a very short time. We have our own experts, laboratories, and relevant accreditations to issue these documents ourselves.

Explosion-proof equipment is classified as hazardous equipment subject to certification. The Certificate of Conformity on ex-proof equipment can be obtained using several certification schemes. General procedures of the mandatory certification are specified on the Resolution of RF Standardization Metrology and Certification Committee "On confirmation of "Rules of a certification of electrical equipment for explosive mediums" of 19.03.03 № 28/10.

 

Ex-proof Equipment

Main principles of explosion safety are regulated all over the world. They are based on the recommendations of the International Electrotechnical Commission (IEC), which offered uniform methods of testing radio communication equipment for conformity and released them to the relevant centers in Europe and in the United States. The approaches and methods of classification are very similar despite having different names for the standards in their respective countries (GOST in Russia, ATEX in Europe, FM in the USA).

That is why, if equipment is certified as explosion-proof by a certification office in Europe or the USA after passing inspection, it stands to reason that this equipment will also successfully obtain certification in the GosGorTechNadzor of Russia. It is important to know that reception of the Russian certificate of conformity for ex-proof equipment (certificate of conformity in explosion-proof version) is necessary and doesn’t depend on the presence of another international certificate.