俄罗斯测试认证集团/海关联盟EAC认证中心

Центр сертификации EAC Таможенного союза ​ООО ТЕСТ СЕРТ 

上海经合工业设备检测有限公司    俄语区域产品认证专家

021-36411223      eac@cu-tr.org   WeChat:18621862553
TR CU Certification and TRCU Declaration schemes-technical regulations of the Customs Union
来源: | 作者:pmt1ac5e9 | 发布时间: 2019-09-05 | 1004 次浏览 | 分享到:
Conformity acknowledgement within the frames of the Customs Union is conducted in accordance with the requirements of technical regulations of the Customs Union (hereinafter — TR CU).Products that come under the requirements of TR CU are subject to obligatory conformity acknowledgement. Lists of products that come under the requirements of TR CU are given in the Attachments to TR CU.

Certification and declaration schemes

Used for conducting works on conformity acknowledgement of products in accordance  with the requirements of technical regulations of the Customs Union


Conformity acknowledgement within the frames of the Customs Union is conducted in accordance with the requirements of technical regulations of the Customs Union (hereinafterTR CU).
Products that come under the requirements of TR CU are subject to obligatory conformity acknowledgement.
Lists of products that come under the requirements of TR CU  are given in the Attachments to TR CU.
Conformity acknowledgement is executed in the form of certification and declaration of conformity.
Based on the results of certificationcertificate of conformity is issued certified by conformity acknowledgement organ, based on the results of declaration – declaration of conformity certified by applicant and registered by conformity acknowledgement organ.

Forms (certification and declaration) and schemes of conformity acknowledgement of products are determined by appropriate Technical Regulations of the CU.
Generally the following schemes of certification and declaration are used:

 Declaration schemes

Scheme

Basis of declaration

Notes

1) For the shipment of products

Based on the results of in-house tests of the shipment

 

Applicant - manufacturer, seller (supplier) of the country – member of the CU or a person on the territory of CU authorized by foreign manufacturer

Based on the results of tests of the shipment by accredited laboratory

2) For serial production:

Based on the results of in-house rests of the samples of products and documents confirming production control

Applicant - manufacturer of the country – member of the CU or a person on the territory of CU authorized by foreign manufacturer

Based on the results of tests of the samples of products by accredited laboratory and documents confirming production control

Based on the results of examination (tests) of the types of products and documents confirming production control 

Based on the results of tests of the samples of products by accredited laboratory, QM certificate and documents confirming production control

 

Certification schemes:

Scheme

Basis of certification

Notes

1)  For the shipment of products

 

For the shipment of products based on the tests of the samples of products

Applicantseller (supplier), manufacturer on condition of availability of authorized person on the territory of the CU

 4с

For single product based on the tests of this products

 

Based on the analysis of the documents

(recommended for a limited shipment of products supplied by foreign manufacturer

or for complex products intended for equipping the facilities on the territory of the CU)

Applicant —  manufacturer on condition of availability of authorized person on the territory of the CU

2)  For serial production

Based on the samples tests and analysis of production

 

 

Based on the samples tests and quality system certificate

Based of  the results of project investigation and  analysis of production

Schemes are used for serial production in case it is difficult or impossible to confirm conformity to the requirements during the tests of finished product

 

Based of  the results of project investigation and quality system certificate

(Project investigation- analysis of technical documentation used for production, results of calculations, tests of the samples of products)

Based on the results of examination (tests) of the types of products and  analysis of production.

 

For complex products intended for serial or mass production and also in case of planned production of numerous modifications of products

 

Based on the results of examination (tests) of the types of products and quality system certificate .

(Examination of type includes:

- examination of the sample of product as standard specimen of products;

- analysis of technical documentation,  test of sample or critical components of products)

 

Applicant for serial certification may be legal entity or a physical person registered in the Customs Union as a legal entity or as individual entrepreneur, or manufacturer, or with the functions of foreign manufacturer based on the agreement about the conformity of supplied products and about responsibility for non conformity with the requirements of Technical  Regulation.

Applicant for shipment of products certification may be legal entity or a physical person registered in the Customs Union  as a legal entity or as individual entrepreneur, or manufacturer, or seller or with the functions of foreign manufacturer based on the agreement about the conformity of supplied products and about responsibility for non conformity with the requirements of Technical Regulation.




俄罗斯认证联系:上海经合工业
021-36411223    eac@cu-tr.org
手机/微信;18621862553
      
  微信号 扫一扫联系我              公众号 扫一扫 关注我